How to enable Samsung Note S4 android 5.0 diagnostic mode

Samsung android 5.0 diagnostic mode enable

How to enable or activate Samsung android 5.0 and above diagnostic mode for flashing.

It has been a thing of disturbance that many Samsung running android lollipop version 5.0 and above have this problem of not enter diagnostic mode when you want to work with it.

Samsung android 5.0 diagnostic mode enable

Step 1 go to Menu phone dialer and dial

 *#9090#

Step 2 this picture down will pop up

 Samsung Diagnostic USB

Step3 Then select   DM/DU over HSIC*

Step 4 go back to Menu dialer and dial

*#0808#

Step 5 this display picture down will pop up

Samsung android 5.0 diagnostic mode enable

Samsung Diagnostic USB not connecting

Step 5 Then you select DM+MODEM+ADB*

But after doing these with Samsung android 5.0 version and above nothing will happen. There will be nothing to indicate that the USB is detected on computer.

So what will you do here?

How to enable Samsung android 5.0 version & above diagnostic mode

Solution

1. Put the phone in recovery mode eg Note S4 SM-N910A by holding Volume up and Home and power buttons together.


2. When the Samsung enters recovery mode, then you choose “enable cp or enabling cp”


3. Then reboot the Samsung android lollipop 5.0.


4. Then dial *#0808# choose dm+modem+adb.


5. Plug your USB to computer; check the setting port on Z3X or Furious Gold.


6. By now the Samsung android should be connected and you can do other things.

Caution:

Flashing or doing anything to your android can brick your phone especially Samsung galaxy Note S4 N910a. Zamdtek is not responsible to whatever harm done to your phone. But this particular solution has been tested by us and is working 100%.

Upcoming search

How to unlock Samsung S4 network