How to unlock Samsung network with Z3x Get Micro-USB cable. Phone must be powered on. Type *#0808# and select 'DM+MODEM+ADB'. Type *#9090# and choose USB (or 'DM/DUN over HSIC'). Reboot phone
 |
| Z3x Box |
Recent phones added for Z3X operation
-Added E1172 flash, read code, unlock, imei repair first in the world
- Added C3782 flash, read code, unlock, imei repair first in the world
- Added E2252 flash, read code, unlock, imei repair first in the world
- Added T379 read codes
- Added S5229 flash, read code, unlock, imei repair
- samsung t337a unlock done.
How to unlock Samsung network with Z3x
Get Micro-USB cable.
Phone must be powered on.
Type *#0808# and select 'DM+MODEM+ADB'.
Type *#9090# and choose USB (or 'DM/DUN over HSIC').
Reboot phone.
Select Samsung diagnostic port in port settings.
Connect USB cable, install drivers if needed.
Press 'Unlock' button for direct unlock.
How to reset Google account activation or Samsung reactivation lock with Z3x.
Step 1
Download and install ADB.
Download samsung firmware and remove sBoot file.
Connect phone to PC with USB cable, install drivers if needed.
Select device in ADB settings.
Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
Hard reset the samsung after Reset FRP.
Ensure USB debugging and oem unlock are activated.
How to flash Samsung with Z3X
Lets use Samsung S532o
Go to samfile on Z3x support and download the said file.
Install the driver of Samsung S5320.
Prepare the usb for computer connection.
Open the Z3x box interface and load the three files,
If everything is ok at this stage then. Remove the battery for 5 seconds and reinsert it back.
Press the power for some seconds and connect the USB.
Then your Samsung S5320 will flash with the loaded flash file.
Follow the instructions carefully.
.png)
.png)
COMMENTS