How to recover Tecno W3 dead with this error on Miracle box and SP Tool "ERR21002.00"
Tecno W series is another product of Tecno company just like Camon. Recently we notice that that particular android phone comes with same problem. It is a challenge to phone technicians and a big issues to phone users.
Have you encounter this ...s-ft dram-fail. (Check that your load matches the destination)
Tecno W series is another product of Tecno company just like Camon. Recently we notice that that particular android phone comes with same problem. It is a challenge to phone technicians and a big issues to phone users.
Have you encounter this ...s-ft dram-fail. (Check that your load matches the destination)
Sft dram fail on sp flash tools dram fail error with SP Tool when flashing Tecno W3.
It has been a norm that same thing happens to almost all Tecno W series like Tecno W2, Tecno W3, Tecno W3 lte, Tecno WX3, Tecno WX3P, Tecno W4, Tecno W5 brick, dead and blank.
You will hear am using the phone and suddenly that screen started shaking, at a stage the phone hanged on white screen. I turned it off or removed battery and the phone never power again.
Some people will complain that during flashing the phone hang on the way and never continue. There are many dead Tecno W. Than those working at the time if writing.
Zamdtek took a research and come up with better solution to revive your dead Tecno W3.
Learn How to unlock Android phones Bootloader.
How to recover my bricked, dead or not power Tecno W3.
1. Charge your battery to around 80%
2. Download this file here.
3. Download MTK drivers.
4. Download SP Tool and learn how to use it here
5. Flash Tecno W3 with this file first
6 Then flash it with full file.
If this step doesn't work then you have to change the Tecno W3 RAM here.
Below is a reading of Tecno W3 from Miracle Box with error information
1. Power Off Phone , Remove Battery, Insert Battery Back2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Open Port Err:
*** the Port be occupied.
Waiting for USB Port...
Set MTK USB Port (COM29)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
Downloading Boot8 ...
ERR21002.00
9 Comments
Get a working Tecno L8 LTE make a full backup.
Extract the image file.
Ensure the two phones info match