China phone restarts solution without flashing |
This solution applies to New China phones with Power Bank Battery. The problem is always caused after changing the screen and falling. The phone will be restarting instead of power on but not flashing. Read down as you find solution to the problem.
We have show you China phone power solution before today we going to bring to you the most common problem with China phone which is Light.
In this post we are going to show the easiest way you can fix both restarts after LCD or screen fixing china phone.
See itel 5616 power solution here
Note: Android China phones are not included here.
How to solve China Phone restarting problem
1 Get you star-screw driver.
2 Get your Rework Station on if you have any.
3 Get you connecting wire ready.
4 Plug your Soldering iron.
5 Get paste ready for applying on the base.
6 Remove the battery and sim of the phone.
7. Loose/disassemble your phone with screw driver
8. Check for water damaged part or rust on the screen legs.
9. Clean the phone with vacuum cleaner or spirit.
10. Test if the light will come up.
11. If it does then is time to do the real job.
Take a look at the picture below.
Use lead and soldering iron and make short some legs according to the diagram.
Use connecting wire and tap light from the led at the keypad according to the second picture below
If you get the connection right the test the China phone and see the screen light working.
This has been tested on our workshop before dropping it as a post.
Check China phones Keypad solution here
If you don’t get the picture clear use the comment box.
0 Comments