Ad code

How to root Tecno M5 with Volcano Box

How to root tecno & mtk android with Volcano Box

Smart phones also know as android come with free google applications will only be utilized well if is rooted. There are many ways which this particular device can be rooted. Here we are going to discuss how to root it with Volcano Box. The good thing is that you can root & unroot some androids. But before you root ensure that you have backup your device firmware.

Steps on how to root android with Volcano Box

  1. Read the phone first

Available Ports:COM47
Current Port:COM47

Analysis of USB port,Please insert phone USB cable.
Hardware version:CA01
Software version:0000
SecCfgVal :0x00000000
BromVersion :0xFF
BLVersion :0x01
Boot downloading complete!
EMMC_BOOT1_SIZE: 0x00200000
EMMC_BOOT2_SIZE: 0x00200000
EMMC_PRMB_SIZE: 0x00200000
EMMC_GP1_SIZE: 0x00000000
EMMC_GP2_SIZE: 0x00000000
EMMC_GP3_SIZE: 0x00000000
EMMC_GP4_SIZE: 0x00000000
EMMC_USER_SIZE: 0x0E7000000(3.61 G)

Read phone information success.

2. Follow the below diagram instructions

mtk android root

Make sure you activate debugging mode.

Then open Volcano Box.

Install all the drivers that is associated with mtk android (MTK port drivers).

Then backup the firmware.

Make sure your battery is 60-70% charge.

Save the firmware where you can remember.

When you are done with the backup then is time to start the root proper.

Select the ADB root option.

Wait for the Volcano box to root the mtk android finish.

Now that your mtk chip android smart phone has been rooted then you have to follow screen instructions to fresh activate the phone.


Rooting mtk may brick your android smart phone. So that why is important to backup the mtk android flash file/firmware inform of .bin. If anything goes wrong then you can re-flash your phone with the same .bin. The advantage of bin file is that you don't need to fix imei(imei will not corrupt) after flashing. Make sure you follow the steps carefully.

Post a Comment