We our recent articles we describes extensively on how to flashed a bricked MTK android phones. The only way to recover an MTK android without RAM problem. In other to be on save side, it is advisable to make a backup of the phone firmware before flashing.
This is necessary even even the phone doesn't power. If the phone powers it is an added advantage. Reading the phone information and backup is not an option but a must. Why China Phones are different from other phones is because you can never trust a rom you see online.
Here, you are going to see a tested way you can backup Tecno CC7. If you have a backup and something goes wrong after flashing, you can easily recover it back.
1. Charge the phone battery to around 80%(optional)
2. leave the phone in off state otherwise hold the battery for some seconds to power it down completely.
3. Download any of this software: NCK, Miracle Box, AfterSalesService, CM2 or any other soft ware.
4. Remove the phone battery and if possible.
5. Connect the phone to computer and allow it install all drivers.
Watch the video down for more information.
You can use memory card also. If the phones still boot to bootloader, Insert the card into the phone and see this method. Select backup and allow the phones for some minutes to finish saving the necessary files.
See image below
You can continue with your flashing.
This method has been tested in the following phones
Infinix Zero 5
Infinix Zero 5 Pro
Infinix Note 4 Pro
Infinix Hot 5
Infinix Hot S3
Tecno Camon 11 and Camon 11 Pro
Tecno Camon iClick 2
Tecno Camon i2 and i2 X
Tecno Camon iAir 2
Tecno Camon i Twin
Tecno Pouvoir 2 and Pouvoir 2 Pro
Tecno Spark 2
Tecno Camon iClick
Tecno Camon X and Camon X pro
Tecno Camon CM
Tecno Camon I
Tecno Phantom 8
The Infinix Hot S3
Infinix Hot S3X
Infinix Smart 2, Smart 2 Pro and the Infinix Smart HD.
Infinix Hot 6
Infinix Hot 6 Pro
Infinix Note 5
Infinix Note 5 Pro
Infinix Note 5 Stylus
Infinix Zero 6
Infinix Zero 5
Infinix Note 4
Infinix Note 4 Pro
Infinix Hot 7
0 Comments