S_FT_ENABLE_DRAM_FAIL(4032)
The major causes of Enable DRAM failed is mostly Hardware and Software.
a) If you flash a phone with wrong Preloader ROM. The phone may be the same but the loader version are not same. This causes DRAM FAIL.
b) If the DRAM is bad or corrupt it can cause these issue. See how to change MTK android DRAM here.
Note: Unless you are flashing a dead M?TK android never tick Preloader. Once you tick preloader and flash, if the preloader doesn't match the phone, it will brick it.
How to fix S_FT_ENABLE_DRAM_FAIL(4032) in MTK android phones.
1st Method
a) Ensure you have latest SP Flash Tools and open it.b) Download the specific firmware or ROM or use backup.
c) Turn download speed to Full Speed and W/O Battery.
d). Bring your USB cable on.
e). Remove the battery.
f) Load the scatter file in SP Tool but untick Preloader.
g) Click Download button and wait till download finished.
2nd Method
a) Download the specific firmware or ROM or use backup.b) Download latest SP Tools.
c) Download latest MTK USB drivers and install.
d) Format the whole flash except bootloader.
e) Short the part of ram emmc with Proccesor.
f) Load the scatter file in SP Tool but untick Preloader.
g) Click Download button and wait till download finished
3rd Method
a) Download the specific firmware or ROM or use backup.b) Download latest SP Tools.
c) Download latest MTK USB drivers and install.
d) Reheat or Reball mediatek, emmc, RAM and CPU.
e) Allow to phone to cool before further process
f) Load the scatter file in SP Tool but untick Preloader.
g) Click Download button and wait till download finished
4th Method
a) Download the specific firmware or ROM or use backup.
b) Download latest SP Tools.
c) Download latest MTK USB drivers and install
e) Select format whole flash then flash.
d) Press Download
f) Press the volume down button (key to reduce volume), then it can trigger the yellow bar progress continue.
g) Click Download button and wait till download finished
By now one method must work.
0 Comments