Tecno T410 and other small Tecno power solution.
We have show you China phone power solution before today we going to continue with other China phones Power solution..
Water damaged or liquid damaged China phone can easily cause China phone can't power or continuous displaying white screen. In most cases the China phone will charge but can not power on on.
Note:
Zamdtek is not responsible for any damage done to your phone during repair. Care should be taken to avoid removing others components close to the one you want to change or replace. Handle rework station with care because it can damage anything even your skin
In this post we are going to show the easiest way you can fix power problem of any china phone.
Note: Android China phones are not included here.
Tecno T340 power solution.
Tecno T350 power solution.
Tecno T472 power solution.
Tecno T528 power solution.
Tecno T470 power solution.
Tecno T605 power solution.
Tecno T526 power solution.
Tecno T611 power solution.
Tecno T484 power solution.
Tecno T411 power solution.
Nokia 130 Keypad solution
Tecno Spark K7 frp bypass
How to repair China phone that is dead eg Tecno T410.
1. Get you star-screw driver.
2. Get your Rework Station on if you have any.
3. Get you connecting wire ready.
4. Plug your Soldering iron.
5. Get paste ready for applying on the base.
6. Remove the battery and sim of the phone.
7. Loose/disassemble your phone with screw driver
8. Check for water damaged part or rust on the screen legs.
9. Clean the phone with vacuum cleaner or spirit.
10. Test if the light will come up.
11. If it doesn't work then is time to do the real job.
 |
Tecno T410 China phone power solution |
Take a look at the picture below.
Use lead and soldering iron and make short some legs according to the diagram.
Use connecting wire and tap light from the led at the keypad according to the second picture below
If you get the connection right then test the China phone and it will power on.
This has been tested on our workshop before dropping it as a post.
If you don’t get the solution use the comment box.
0 Comments