How to repair Nokia 130 USB track jumper

How to flash Nokia 130 with bad USB or charging port. Just follow the picture or diagram.

How to flash Nokia 130 with bad USB or charging port.

Many a time’s phones develop one fault or the other but we seek for the solution. We bring to you the simple USB track for Nokia 130.

How to flash Nokia 130 with bad USB or charging port

What you need to fix Nokia 130 USB track jumper

1. A good working common sense very important.


2. A complete set of phone screw drivers.


3. Working digital or analogue meter.


4. A rework station in case you want replace an ic.


5. A sharp blade to scratch the point you want to solder.


6. A good working soldering iron and soldering paste.


7. Connecting wires or use old handsfree wires.


8. A little technical skill.


9. Check the diagram or picture very well.

Due to so many questions we ha decided to add another picture Nokia 130 RM-1035 USB ways jumper

Nokia 130 RM-1035 USB ways jumper

How to fix Nokia 130 USB track jumper

1. Loose or disassemble the Nokia 130.


2. Carefully remove Nokia 130 cover.


3. Use cleaning fluid to clean the China phone.


4. Scrap the points according to the picture.


5. Use your connecting wire to short or join the points together.


6. Ensure that your soldering iron is hot and has a good tip.


7. Test the continuity with meter of the point you just join together.

These solutions may help you

How to fix Nokia 105 speaker & ringer problem.

How to fix Nokia 105 power solution.

How repair Nokia 105 charging problem

How to fix Nokia 940 XL insert simcard problem.

How to fix Nokia X2-00 keypads problem.

How to fix Nokia 130 power problem.

How to fix Nokia 105 speaker & ringer problem.

How to fix Nokia 105 power solution.

How repair Nokia 105 charging problem

How to fix Nokia 105 insert simcard.

Test the China phone new power solution phone before you tight or assemble the phone back