Spredtrum SPD SC6531 flashing eg itel 2020 How to flash spd china phone spd sc6531a Step 1 Read the phone info SC6531 > Getting Mobile Connection Info...
Spredtrum SPD SC6531 flashing eg itel 2020
 |
| spd sc6531a |
Step 1 Read the phone info SC6531
> Getting Mobile Connection Info...
VCC Pin:
GND Pin:2,
Signal Pin:1, 3, 5, 6, 7, 8, 10,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:6 D-:8
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM16
Driver Name->>>SCI USB2Serial
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.2
>>> Mobile Info
Flash ID:0x00C8006000000000
Flash Name:SF_GD25LQ128
Flash Size:0x01000000 -> 16M
CPU Name:6531
All Done...
Step 2 Backup the flash file
>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:2,
Signal Pin:1, 3, 5, 6, 7, 8, 10,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:6 D-:8
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM16
Driver Name->>>SCI USB2Serial
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.2
>>> Mobile Info
Flash ID:0x00C8006000000000
Flash Name:SF_GD25LQ128
Flash Size:0x01000000 -> 16M
CPU Name:6531
Baud Rate is Switched To:921600
>>> Reading Flash...
Reality Flash Size£ยบ0x00C00000 -> 12M
All Done...
Step 3 write the same flash file
>>> Getting Mobile Connection Info...
VCC Pin:
GND Pin:2,
Signal Pin:1, 3, 5, 6, 7, 8, 10,
>>> Scanning Mobile PinOut...
>>> USB Pinfind No need Hold Mobile Power key...
USB Pin Out: D+:6 D-:8
HardWare:VID:17_82 PID:4D_00
This is a Spreadtrun chip set...
>>> Scanning Mobile USB Port...
>>> Detecting COM PortCOM16
Driver Name->>>SCI USB2Serial
>>> Connecting Mobile...
Mobile Connection Success...
Mobile Firmware Version:SPRD3
>>> Downloading First Boot...
>>> Mobile Info
Project ID :Spreadtrum Boot Block version 1.2
>>> Mobile Info
Flash ID:0x00C8006000000000
Flash Name:SF_GD25LQ128
Flash Size:0x01000000 -> 16M
CPU Name:6531
Baud Rate is Switched To:921600
Analyzing Mobile File System Info...
Formatting Start Adress(Hex): 0x00BB8000 Size(Hex): 0x00448000
All Done...
You can download the respective flash file from here
Watch the video tutorial here
You can connect spd sc6531 chip like this if the USB is bad
 |
China phone rx tx |
Use the volcano box also for this kind of work
.png)
.png)
COMMENTS