Tecno M8 Mi 2013022 Flash Firmware.
There is an advancement in technology about expected things. If you don't follow the trends you may be lost out. Before, flashing a bricked mtk Android phone by downloading a backup file scatter file or BIN file but today what is different.
Flashing Androids 8.1 and above version requires more attention than before.
Do you have a bricked Tecno M8 or any other android mtk that only shows red indicator and nothing else?
Did you flash a wrong firmware or got your phone bricked?
Did your phone spoil during update process or fell down and damage but LCD still working?
Follow the instruction below to recover your spoiled mtk Android phone.
Step 1. charge your brakes phone until the indicator light shows Green.
Step 2. Get computer already Windows 7 highly recommended.
Step 3. Download and install latest MTK drivers from here.
Step 4. Download and extract the latest Android ROM Infinix Hot 9 firmware.
Step 5. Download latest NCK Crack tool Tecno flasher or any other mtk flasher.
Step 6. If you have a flashing box or dongle use Miracle box CM2 dongle nck box dongle.
Step 7. Connect your android phone to computer with USB when there is a pop to install drivers allow all the necessary drivers to finish installation.
Step 8. Setup your flasher or box, open the interface on the computer, select your phone type if, go to the bootbase and load the Da file downloaded earlier, then load the ROM firmware extracted earlier.
Step 9 if everything is ok installed and connect the phone, then click download/Flash/wright button, connect the phone in power off state, follow the screen instructions and allowed the flasher to write or Flash the phone OS.
Watch the Video on how to download the file here
Step 1. charge your brakes phone until the indicator light shows Green.
Step 2. Get computer already Windows 7 highly recommended.
Step 3. Download and install latest MTK drivers from here.
Step 4. Download and extract the latest Android ROM Infinix Hot 9 firmware.
Step 5. Download latest NCK Crack tool Tecno flasher or any other mtk flasher.
Step 6. If you have a flashing box or dongle use Miracle box CM2 dongle nck box dongle.
Step 7. Connect your android phone to computer with USB when there is a pop to install drivers allow all the necessary drivers to finish installation.
Step 8. Setup your flasher or box, open the interface on the computer, select your phone type if, go to the bootbase and load the Da file downloaded earlier, then load the ROM firmware extracted earlier.
Step 9 if everything is ok installed and connect the phone, then click download/Flash/wright button, connect the phone in power off state, follow the screen instructions and allowed the flasher to write or Flash the phone OS.
Watch the Video on how to download the file here
Download Tecno M8 MI firmware here
This method has been tested in the following phones
Infinix Zero 5
Infinix Zero 5 Pro
Check How to Fix Tecno Camon 12 Here
Infinix Note 4 Pro
Infinix Hot 5
Infinix Hot S3
Tecno Camon 11 and Camon 11 Pro
Infinix Note 4 Pro
Infinix Hot 5
Infinix Hot S3
Tecno Camon 11 and Camon 11 Pro
.png)
.png)
COMMENTS