Do you have this phone Vibo Phantom 5 mini that shows pattern, Password or enter PIN lock. The solution is here. If by mistake the phone brick you can download the ROM pac file here.
Vibo Phantom 5 mini Hard Reset and Flashing.
- Change your phone for about 80%..
- Download Miracle Box Crack from here.
- Lean how to use Miracle Box crack here.
- Find a better USB cable.
- Open Miracle Box interface and Select SPD>>SPD8810/6820..
- Click on the Read option up.
- Connect SPD android phone holding Volume UP.
- It takes about 30 minutes for Miracle Box to backup the pac file from the phone.
- Note down the folder where the pac file is saved.
- Remove your phone from Computer and phone battery also.
- Go back to Miracle Box software and Select Format.
- Repeat NO 7 again.
- After formatting remove the phone and boot it. It takes time to boot for the first time.
- If anything go wrong flash your phone with backup file on download working file here.
Welcome to use Miracle Box
(World's First Fuzzy Logic Based Tool)
Update:16-01-09
Connected OK.
Fuzzy Logic Method is very safe and reliable
!
1. Power Off Phone , Remove Battery, Insert
Battery Back
Download or request for Vibo phantom 5 Mini .pac file here
Download or request for Vibo phantom 5 Mini .pac file here
2. Insert USB cable. In some cases Required
Hold BootKey
3. Use Miracle Boot Key In cases Boot key not
Find
4. Battery Should be Charged more then 50%
Open Port Err:
***
the Port be occupied.
Waiting for USB Port...
Waiting for USB Port...
none usbport, maybe driver not installed
1. Power Off Phone , Remove Battery, Insert
Battery Back
2. Insert USB cable. In some cases Required
Hold BootKey
3. Use Miracle Boot Key In cases Boot key not
Find
4. Battery Should be Charged more then 50%
Open Port Err:
***
the Port be occupied.
Waiting for USB Port...
1. Power Off Phone , Remove Battery, Insert
Battery Back
2. Please Hold BootKey(UP and DOWN),Insert
USB cable
3. Use Miracle Boot Key In cases Boot key not
Find
4. Battery Should be Charged more then 50%
Scanning USB Serial port...
Waiting for USB Port...
SU2Serial Port: COM427
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot13...
CPU
type: 8810/6820
Flash
type: NAND
Flash
ID: 00AD00BC
Flash Model: HYNIX H8BCS0UN0MCR
Flash
Size: 0x21000000(528.0M)
Being analyzed,Wait...
256k(spl),1536k(2ndbl),256k(params),512k(vmjaluna),9m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),195m(system),185m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic),512k(simlock),10m(intmemory),1m(boot_logo3)
Analyzed data Failure.
none usbport, maybe driver not installed
1. Power Off Phone , Remove Battery, Insert
Battery Back
2. Please Hold BootKey(UP and DOWN),Insert
USB cable
3. Use Miracle Boot Key In cases Boot key not
Find
4. Battery Should be Charged more then 50%
Scanning USB Serial port...
SU2Serial Port: COM427
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot13...
CPU
type: 8810/6820
Flash
type: NAND
Flash
ID: 00AD00BC
Flash Model: HYNIX H8BCS0UN0MCR
Flash
Size: 0x21000000(528.0M)
reading,Wait...
Read Completed.
>>File save to: C:\Users\ZD
Tech\Documents\HTC\Vibo 8810_6820_HYNIX
H8BCS0UN0MCR
0 Comments