Samsung Galaxy S9 and S9+ FRP Bypass.
Download these Samsung S9 ROM singlesSM-G950F/FD : G950FXXU1AQDD_OXM1AQDD_Arabic
SM-G955F/FD : G955FXXU1AQDG_OXM1AQDG_TUR
SM-G950U : G950U-P-T-V-A-R4 ARABIC MULTILANGUAGE
SM-G955U : G955USQU1AQC8_CL10895874_QB12856026_REV00
If you are prepared
1. You have to flash combination, after that flash from normal firmware only system+sboot+boot+recovery+cache.
It takes 15 minutes to boot up then only click next-next-next or swipe from up the notification bar and go to setting then to enable OEM and make hard reset.
Then after about 15 minutes and the phone doesn't boot, or hangs on logo then re-flash sboot + boot from normal firmware.
FRP on G955F G950W and G955W g950f 8.0
This operation was successfully used to unlock frp on s8 plus g955u by selecting g935f pda and phone
Samsung Galaxy S9 FRP bypass and unlock
Check Samsung Galaxy S8 and S8+ FRP bypass
Download these combination files.
SM-G960F/FD : COMBINATION_OXM_FA80_G960FXXU1ARD1
SM-G965F/FD : COMBINATION_OXM_FA80_G965FXXU1ARC3
SM-G960U/U1/XU: COMBINATION_FAC_FA80_G960USQU1ARBA
SM-G965U/U1/XU: COMBINATION_FAC_FA80_G965USQU1ARBA
Also download these combination files.
SM-G960F/FD : G960FXXU1ARC5
SM-G965F/FD : G965FXXU1ARC5
SM-G960U : G960USQU1ARBG
SM-G965U : G965USQU1ARBG
pass:- halabtechteam
How to bypass frp on Samsung S9 and S9 plus
Before you begin, it is important to have all the tools at hand. you will need:
Recharge your phone’s battery to about 80%
Install Samsung USB drivers on your computer,
Download and extract the Samsung Galaxy S9 Plus G965F stock firmware on your computer:
Download and extract the latest version of Odin: Download Odin
Restart Your Device in DOWNLOAD MODE
Samsung devices have a Download mode for flashing with Odin:
>>Turn off your Samsung Galaxy S9 Plus G965F
>>Hold Volume Down+ Home button + Power button at the same time for 3-4 seconds.
>>Connect your Samsung Galaxy S9 Plus G965F to your PC via the USB cable
>>Run the “Odin” file as an administrator.
>>Check that the USB port number is displayed in the “ID: COM” box and the message “Added !!” in the “Message” box. the port ID: COM on Odin must change to Blue or Yellow, depending on the version of Odin used.
>>Click on “AP” or “PDA” and import the Samsung Galaxy S9 Plus G965F firmware file.The firmware used in this tutorial is an official “One Package” firmware deployed by SAMSUNG.
>>Click “Start” to begin the installation.
>>Once the message “PASS!” Displayed, unplug your mobile from your PC.
Credit to halabtechteam
SM-G960F/FD : G960FXXU1ARC5
SM-G965F/FD : G965FXXU1ARC5
SM-G960U : G960USQU1ARBG
SM-G965U : G965USQU1ARBG
pass:- halabtechteam
How to bypass frp on Samsung S9 and S9 plus
Before you begin, it is important to have all the tools at hand. you will need:
Recharge your phone’s battery to about 80%
Install Samsung USB drivers on your computer,
Download and extract the Samsung Galaxy S9 Plus G965F stock firmware on your computer:
Download and extract the latest version of Odin: Download Odin
Restart Your Device in DOWNLOAD MODE
Samsung devices have a Download mode for flashing with Odin:
>>Turn off your Samsung Galaxy S9 Plus G965F
>>Hold Volume Down+ Home button + Power button at the same time for 3-4 seconds.
>>Connect your Samsung Galaxy S9 Plus G965F to your PC via the USB cable
>>Run the “Odin” file as an administrator.
>>Check that the USB port number is displayed in the “ID: COM” box and the message “Added !!” in the “Message” box. the port ID: COM on Odin must change to Blue or Yellow, depending on the version of Odin used.
>>Click on “AP” or “PDA” and import the Samsung Galaxy S9 Plus G965F firmware file.The firmware used in this tutorial is an official “One Package” firmware deployed by SAMSUNG.
>>Click “Start” to begin the installation.
>>Once the message “PASS!” Displayed, unplug your mobile from your PC.
Credit to halabtechteam
0 Comments