How to repair Tecno Y6 that is hot & bricked

Today we are bringing you a solution to Tecno Y6 that discharges battery quickly, feel hot to touch or is totally dead.

The choice of android you buy sometimes depends on your budget. But in most cases it depends on the ore you preferred or what someone recommended for you.

This is not always the case because if you want to buy a phone, think of the durability not affordability. This is because a smart phone you buy for $8 that can last for 4 years is better than the one you buy for $5 that can only last for one year.

That you have a new phone doesn’t mean it will not be faulty. Zamdtek is always here to help you rectify any fault you have with your phone or computer.

Today we are bringing you a solution to Tecno Y6 that discharges battery quickly, feel hot to touch or is totally dead.

Note:
Zamdtek is not responsible for any damage done to your phone during repair. Care should be taken to avoid removing others components close to the one you want to change or replace. Handle rework station with care because it can damage anything even your skin.

Check How to remove Nokia TA-1010 password

Did your Tecno Y6 water damaged or can’t power?
It doesn’t vibrate or not display anything or screen or LCD. Have you tried flashing and no response? Just like Samsung Galaxy 2 power solution, Tecno Y6 can’t connect to PC or not charging.

How to repair Tecno Y6 power & hot problem

Ø Get your screw-driver ready.

Ø Get your Rework Station.

Ø Get you soldering iron.

Ø Get your soldering lead.

Ø Loose or disassemble the phone.

Ø Remove or detach the battery.

Ø Check for water damage and clean up the panel.

Ø Replace or put the battery and try power the phone.

Ø If you problem is not solved.

Ø Switch on your Rework Station and remove/change this component.