Advertisement

Ad code

How to flash and download Kimfly M4 ROM or flash file

Download Kimfly M4 Stock ROM or firmware


Kimfly M4 ROM


Kimfly M4 specifications


Model                 Kimfly M4
Design: Bar
Screen Resolution: 800×480
Display Type: IPS
Screen: 4.0-4.9″
Camera: < 3MP
Operation System: Android
Feature: Auto Focus, Bluetooth, Build in Flash, Dual Sim Card, Email, FM Radio, GPS Navigation, MP3 Playback, Touch Screen, WiFi
Color: Black, White
OS: Android 4.4
CPU: SPRD 6820
Battery Capacity(mAh): 1000mah
Band: GSM850/900/1800/1900
ROM: 512MB
RAM: 256MB
Earphone: 3.5mm
Language: Multiple Languages

Caution: 
We recommend you backup your itel or SPD android phone with Miracle box in .bin format before flashing.
Ensure you read all the instructions careful before you start flashing your SPD android phone. zamdtek is not responsible for any bricked/dead spd android phone.
Look at the SPD android you have, compare it with the picture of the ROM/firmware you  are about to download.
You must download the exact ROM or file or .bin of your SPD android phone, before you load the file for flashing operation.
Flashing a wrong ROM or file or .bin file will not only kill your SPD android phone but will make it not to be detected by any computer.

Kimfly M4 Stock ROM or Flash file

Android Version 5.1

Android Version 6.0
Download

If you encounter 
spd sc7715 flashing failed incomplete partition learn how to fix it here


What you need to flash itel SPD android phones


You need a working laptop or good PC that has no virus.
Download and install SPD Drivers on your PC.
Download and install Research Download or Upgrade download on your PC. We recommend Research Download for smaller itel android phones.
Download and install Miracle Box.
Download and save the SPD android flash file or ROM.

Learn How to flash SPD with Research Download or Upgrade download here

Learn how to use Miracle Box and flash SPD android phone

 Steps

  1. Get a working the same type of SPD android phone.

2.            Connect your Miracle box to the computer.

3.            Get a working USB cable and working brain.

4.            Open the Miracle box interface.

5.            Select Read file.

6.            Hold Up of the android phone.

7.            Connect the phone to USB and allow it to read the flash file.

8.            Save the file to a location where you can remember.

9.            Bring the bricked SPD phone do step 6.

10.         Connect the phone to USB and select write file.

Allow the phone to write the file finish.

Post a Comment

0 Comments

Comments