How to flash and download Kimfly Z1 ROM or flash file

Download Kimfly Z1 Stock ROM or firmware

Kimfly Z1 Stock Rom 

Kimfly Z1 specifications

Model                 kimfly Z1

Kimfly Z1 Dual SIM 4 Inch WVGA Display Android 4.4.2 KitKat OS with 512 MB RAM and 4 GB Internal Memory (Blue)

 Be the first to review this item  

Cash on Delivery eligible.

Currently unavailable. 

We don't know when or if this item will be back in stock.

4 inch WVGA Display, 480*800 Resolution, 2100 mAh Battery

Android 4.4.2 KitKat OS, Dual SIM, GSM + GSM

512 MB RAM and 4 GB Internal Memory, Expandable Memory up to 64 GB

1.3 MP Front Facing HD Camera and 3 MP Back HD Camera with Flash Light

Wi-Fi, Bluetooth V2.1, USB 2.0 etc. connectivity

Caution: 

We recommend you backup your itel or SPD android phone with Miracle box in .bin format before flashing.

Ensure you read all the instructions careful before you start flashing your SPD android phone. zamdtek is not responsible for any bricked/dead spd android phone.

Look at the SPD android you have, compare it with the picture of the ROM/firmware you  are about to download.

You must download the exact ROM or file or .bin of your SPD android phone, before you load the file for flashing operation.

Flashing a wrong ROM or file or .bin file will not only kill your SPD android phone but will make it not to be detected by any computer.

Kimfly Z1 Stock ROM or Flash file

Download

If you encounter spd sc7715 flashing failed incomplete partition learn how to fix it here. 

What you need to flash itel SPD android phones

You need a working laptop or good PC that has no virus.

Download and install SPD Drivers on your PC.

Download and install Research Download or Upgrade download on your PC. We recommend Research Download for smaller itel android phones.

Download and install Miracle Box.

Download and save the SPD android flash file or ROM.

Learn How to flash SPD with Research Download or Upgrade download here

Learn how to use Miracle Box and flash SPD android phone

 Steps

1. Get a working the same type of SPD android phone.

2.            Connect your Miracle box to the computer.

3.            Get a working USB cable and working brain.

4.            Open the Miracle box interface.

5.            Select Read file.

6.            Hold Up of the android phone.

7.            Connect the phone to USB and allow it to read the flash file.

8.            Save the file to a location where you can remember.

9.            Bring the bricked SPD phone do step 6.

10.         Connect the phone to USB and select write file.

Allow the phone to write the file finish