Download Kimfly M1 Stock ROM or firmware
 |
Kimfly M1 ROM |
Kimfly M1 specifications
Kimfly M2 5.0 Inch CNC Metal Frame SC7731C Quad Core Android Cell Phone
1) 5.0’’ 2.5D Arc IPS Touch Screen
2) 5.0MP Back Camera with LED flashlight
3) SC7731C Quad Core CPU
4) Android 5.1 Lollipop OS
5) Real 2000mAh Battery
6) CNC Metail Fram
Caution:
We recommend you
backup your itel or SPD android phone with Miracle box in .bin format before
flashing.
Ensure you read all
the instructions careful before you start flashing your SPD android phone.
zamdtek is not responsible for any bricked/dead spd android phone.
Look at the SPD
android you have, compare it with the picture of the ROM/firmware you are
about to download.
You must download the
exact ROM or file or .bin of your SPD android phone, before you load the file
for flashing operation.
Flashing a wrong ROM
or file or .bin file will not only kill your SPD android phone but will make it
not to be detected by any computer.
Kimfly M1 Stock ROM or Flash file
Android Version 5.1
Android Version 6.0
What you need to flash itel SPD android phones
You need a working
laptop or good PC that has no virus.
Download and install
Research Download or Upgrade download on your PC. We recommend Research
Download for smaller itel android phones.
Download and install
Miracle Box.
Download and save the
SPD android flash file or ROM.
Learn How to flash SPD with Research Download or Upgrade download here
Learn how to use Miracle Box and flash SPD android phone
Steps
- Get a working the same type of SPD android phone.
2.
Connect your Miracle
box to the computer.
3.
Get a working USB
cable and working brain.
4.
Open the Miracle box
interface.
5.
Select Read file.
6.
Hold Up of the android
phone.
7.
Connect the phone to
USB and allow it to read the flash file.
8.
Save the file to a
location where you can remember.
9.
Bring the bricked SPD
phone do step 6.
10.
Connect the phone to
USB and select write file.
Allow
the phone to write the file finish.
0 Comments