Ad code

How to flash and download itel 1703 ROM or flash file

itel 1703 specifications

Model                 IT1703
How to flash and download itel 1703 ROM or flash file

6000mah battery
Screen Size: 7" Full HD touchscreen
Processor: 1.3 Ghz ARM Quad Core
Memory: 1GB RAM, 
Operating System: Android
Camera: 8M
This is the newest itel prime tablet, it started with 1701 to 1702 and now its 1703, this grade has amazing features and currently the price is almost same with the previous versions, The itel iNote Prime IT1703 7" ARM Quad Core-1.3 GHz is a sleek and portable android tablet designed to keep you connected with the rest of the world while on the move.

We recommend you backup your itel or SPD android phone with Miracle box in .bin format before flashing.
Ensure you read all the instructions careful before you start flashing your SPD android phone. zamdtek is not responsible for any bricked/dead spd android phone.
Look at the SPD android you have, compare it with the picture of the ROM/firmware you  are about to download.
You must download the exact ROM or file or .bin of your SPD android phone, before you load the file for flashing operation.
Flashing a wrong ROM or file or .bin file will not only kill your SPD android phone but will make it not to be detected by any computer.

itel 1703 Stock ROM or Flash file


If you encounter 
spd sc7715 flashing failed incomplete partition learn how to fix it here

What you need to flash itel SPD android phones

You need a working laptop or good PC that has no virus.
Download and install SPD Drivers on your PC.
Download and install Research Download or Upgrade download on your PC. We recommend Research Download for smaller itel android phones.
Download and install Miracle Box.
Download and save the SPD android flash file or ROM.

Learn How to flash SPD with Research Download or Upgrade download here

Learn how to use Miracle Box and flash SPD android phone


To flash itel it1703 SPD android follow these steps 


1. Get a working the same type of SPD android phone.

2. Connect your Miracle box to the computer.

3. Get a working USB cable and working brain.

4. Open the Miracle box interface.

5. Select Read file.

6. Hold Up of the android phone.

7. Connect the phone to USB and allow it to read the flash file.

8. Save the file to a location where you can remember.

9. Bring the bricked SPD phone do step 6.

10. Connect the phone to USB and select write file.

Allow the phone to write the file finish.

Post a Comment