Download itel 1508 Stock ROM or firmware
itel 1508 ROM |
itel 1508 specifications
Model
IT1508
itel It1508 5-Inch (512MB RAM, 8GB ROM) Android 5.1 Lollipop, 5MP + 2MP Dual SIM Smartphone - Gold
By itel Have one to sell?Sell yours Here >
(6) Write A Review >
See Details
Key Features
Display: 5.0-Inch (480*854)
Memory: 8GB ROM + 512MB RAM, up to 32GB
Camera: Rear 5.0MP/Front 2.0MP
Operating System: Android 5.1
Battery Capacity: 2100mAh
Dual SIM
Caution:
We recommend you
backup your itel or SPD android phone with Miracle box in .bin format before
flashing.
Ensure you read all
the instructions careful before you start flashing your SPD android phone.
zamdtek is not responsible for any bricked/dead spd android phone.
Look at the SPD
android you have, compare it with the picture of the ROM/firmware you are
about to download.
You must download the
exact ROM or file or .bin of your SPD android phone, before you load the file
for flashing operation.
Flashing a wrong ROM
or file or .bin file will not only kill your SPD android phone but will make it
not to be detected by any computer.
itel 1508 Stock ROM or Flash file
What you need to flash itel SPD android phones
You need a working
laptop or good PC that has no virus.
Download and
install SPD Drivers on your PC.
Download and install
Research Download or Upgrade download on your PC. We recommend Research
Download for smaller itel android phones.
Download and install
Miracle Box.
Download and save the
SPD android flash file or ROM.
Learn How to flash SPD with Research Download or Upgrade
download here
Learn how to use Miracle
Box and flash SPD android phone
Steps
- Get a working the same type of SPD android phone.
2.
Connect your Miracle
box to the computer.
3.
Get a working USB
cable and working brain.
4.
Open the Miracle box
interface.
5.
Select Read file.
6.
Hold Up of the android
phone.
7.
Connect the phone to
USB and allow it to read the flash file.
8.
Save the file to a
location where you can remember.
9.
Bring the bricked SPD
phone do step 6.
10.
Connect the phone to
USB and select write file.
5 Comments