Download itel 1452 Stock ROM or firmware
itel it1452 firmware |
itel 1452 specifications
Model
IT1452
Android version 4.1.2; 7710_4.1.2_C913W_AITAI_1351_en_v20; SDK16
CPU SPD 1 core; ARMv7 Processor rev 1 (v7l) sc7710
Display 480 x 320; DPI: 160; Evaluated Size: 3.6"
Touch screen Multitouch 2 points
GPU Mali-300; ARM; OpenGL ES-CM 1.1 Spreadtrum Build; OpenGL ES 2.0
RAM 512 MB
Flash 0.176 GB; 8 GB 0.5 GB (0.461 GB actual) (see memory map tab)
Caution:
Android version 4.1.2; 7710_4.1.2_C913W_AITAI_1351_en_v20; SDK16
CPU SPD 1 core; ARMv7 Processor rev 1 (v7l) sc7710
Display 480 x 320; DPI: 160; Evaluated Size: 3.6"
Touch screen Multitouch 2 points
GPU Mali-300; ARM; OpenGL ES-CM 1.1 Spreadtrum Build; OpenGL ES 2.0
RAM 512 MB
Flash 0.176 GB; 8 GB 0.5 GB (0.461 GB actual) (see memory map tab)
Caution:
We recommend you
backup your itel or SPD android phone with Miracle box in .bin format before
flashing.
Ensure you read all
the instructions careful before you start flashing your SPD android phone.
zamdtek is not responsible for any bricked/dead spd android phone.
Look at the SPD
android you have, compare it with the picture of the ROM/firmware you are
about to download.
You must download the
exact ROM or file or .bin of your SPD android phone, before you load the file
for flashing operation.
Flashing a wrong ROM
or file or .bin file will not only kill your SPD android phone but will make it
not to be detected by any computer.
itel 1452 Stock ROM or Flash file
What you need to flash itel SPD android phones
You need a working
laptop or good PC that has no virus.
Download and
install SPD Drivers on your PC.
Download and install
Research Download or Upgrade download on your PC. We recommend Research
Download for smaller itel android phones.
Download and install
Miracle Box.
Download and save the
SPD android flash file or ROM.
Learn How to flash SPD with Research Download or Upgrade
download here
Learn how to use Miracle
Box and flash SPD android phone
Steps
- Get a working the same type of SPD android phone.
2.
Connect your Miracle
box to the computer.
3.
Get a working USB
cable and working brain.
4.
Open the Miracle box
interface.
5.
Select Read file.
6.
Hold Up of the android
phone.
7.
Connect the phone to
USB and allow it to read the flash file.
8.
Save the file to a
location where you can remember.
9.
Bring the bricked SPD
phone do step 6.
10.
Connect the phone to
USB and select write file.
Allow
the phone to write the file finish.
0 Comments