How to connect Nokia 220 & 225 to computer without Charging Port.

Before you continue get a working Nokia USB cable. Cut the end closer to the one that goes in Nokia phone

What you need to connect Nokia 220 & 225 USB jumper.

1. A good working common sense very important.


2. A complete set of phone screw drivers.


3. Working digital or analogue meter.


4. A rework station in case you want replace an ic.


5. A sharp blade to scratch the point you want to solder.


6. A good working soldering iron and soldering paste.


7. Connecting wires or use old handsfree wires.


8. A little technical skill.

Before you continue get a working Nokia USB cable. Cut the end closer to the one that goes in Nokia phone otherwise called the Male-head. Peel the separate 4 wire and solder according to the diagram.below

How to connect Nokia 220 & 225 to computer without Charging Port.

This solutions may help you

Nokia 1202 and nokia 5030 light solution without ic.

Nokia 105, 1280, 100 *0# solution

Nokia 130 menu button solution

Nokia 206 fake or self charging

Nokia Lumia 630 mic/ mouth piece solution

How to connect Nokia 220 & 225 USB jumper

1. Loose or disassemble the How to remove Nokia earpiece mode.


2. Carefully remove the  Nokia 220 back cover.


3. Use cleaning fluid to clean the Nokia earpiece mode panel.


4. Scrap the points according to the picture.


5. Use your connecting wire to short or join the points together.


6. Ensure that your soldering iron is hot and has a good tip.


7. Test the continuity with meter of the point you just join together.

Flash or format your Nokia 220 with Miracle Box. Ensure you backup the flash file before any operation.