Ad code

How to repair Tecno P5 android USB ways

How to repair Tecno P5 android USB charging ways solution jumper.

That you have an android phone doesn't mean that it will not damage. Sometimes our carelessness brings problem to us. We at zamdtek always seek way to help you out of your problem.
We bring to you the simple way to fix Tecno P5 android  ways jumper

What you need to fix Tecno P5 android  ways jumper.

How to repair Tecno P5 android USB ways

  1. A good working common sense very important.
  2. A complete set of phone screw drivers.
  3. Working digital or analogue meter.
  4. A rework station in case you want replace an ic.
  5. A sharp blade to scratch the point you want to solder.
  6. A good working soldering iron and soldering paste.
  7. Connecting wires or use old handsfree wires.
  8. A little technical skill.
  9. Check the diagram or picture very well.

Steps on how to repair Tecno P5 android  ways jumper

  • Loose or disassemble the tecno P5 android

  • Carefully remove tecno P5 android cover.

  • Use cleaning fluid to clean the tecno P5 android.

  • Scrap the points according to the picture.

  • Use your connecting wire to short or join the points together.

  • Ensure that your soldering iron is hot and has a good tip.

  • Test the continuity with meter of the point you just join together.

Check other similar phone solutions here.

Tecno android  P5 network solution

Nokia Lumia mic solution

Blackberry Passport hanging solution

Remove android pattern without lost of data

Test the tecno P5 android charging USB ways jumpers before you tight the phone back.

Post a Comment