Advertisement

Ad code

Tecno W3 rom or flash file downloads

Tecno W3 rom or flash file downloads


Do you have a Tecno W3 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all Tecno android smart phone rom and scatter files.

Tecno W3

Tecno w3 flashing


Caution:  Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.

Tecno W3 specification


We have to bring the specification to you to ensure the smart android phone you are working.

Tecno W3 stock rom


W3-H806-A1-M-HIOS-160901V46

Download

W3-H806-A1-M-HIOS-20160612



Download






How to flash or unbrick Tecno W3



  1. Install the MTK drivers to your computer.

  2. Use Miracle flashing Box or SP Tool.

  3. Download the Tecno W3 firmware.

  4. Extract the downloaded rom and locate scatter file.

  5. If you want to use Miracle Box.

  6. Open the Miracle Box interface and select MTK option.

  7. Select the write option.

  8. Click the Browse folder and open the downloaded rom.

  9. Locate scatter the scatter file and click on it.

  10. Plug your Tecno W3 without battery

  11. Install mtk drivers when it popup.

  12. Click Start on Miracle interface and put your battery.

  13. Wait for Tecno W3 to finish flashing.

  14. If you want to use SP tool check the here.

How to setup your android smart phone.


If your Tecno W3 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.

When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.

If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.

Post a Comment

0 Comments

Comments