infinix X506 |
Do you have a Infinix Zero 506 android phone that bricked or can’t power on. Don’t panic because you solution is here. We have in stock all infinix android smart phone rom and scatter files.
Caution: Flashing MTK with wrong rom/file can brick your phone further. If you correct it here otherwise re-flash with correct ROM. We advised to charge your battery to about 80% before you flash.
Infinix Zero 506 specification
We have to bring the specification to you to ensure the smart android phone you are working.
Infinix Zero 506 Lollipop
X506 J608 L 20151019
Download
Infinix Zero 506 16GB Stock rom
X508 J608 16GB 20150408Download
Infinix Zero 506 16GB Stock rom
X508 J609 16GB 20141111
Download
How to flash or unbrick Infinix Zero 506
- Install the MTK drivers to your computer.
- Use Miracle flashing Box or SP Tool.
- Download the Infinix Zero 506 firmware.
- Extract the downloaded rom and locate scatter file.
- If you want to use Miracle Box.
- Open the Miracle Box interface and select MTK option.
- Select the write option.
- Click the Browse folder and open the downloaded rom.
- Locate scatter the scatter file and click on it.
- Plug your Infinix Zero 506 without battery
- Install mtk drivers when it popup.
- Click Start on Miracle interface and put your battery.
- Wait for Infinix Zero 506 to finish flashing.
- If you want to use SP tool check the here.
How to setup your android smart phone.
If your Infinix Zero 506 continues to restarts then do manual hard reset. Setup the phone following the screen instructions. Ensure that you skip connect to wireless.When you setup the phone, then dial *#06# on the keypad to check imei. Also check the baseband.
If the android shows invalid or null imei then use this method and repair it. You can also use MTK engineering to repair the imei.
0 Comments