Advertisement

Ad code

How to repair Nokia 105 Menu keypad solution

Nokia 105 Menu button/ keypad solution


When the menu button of Nokia 105 is not working is possible that inner button for rust. We have to explain the particular Nokia 105 we talking about here:

Nokia 105 accompanies a 1.40-inch touchscreen show with a determination of 128 pixels by 128 pixels at a PPI of 129 pixels for each inch.

The telephone packs 8MB of inward stockpiling can't be extended. To the extent the cameras are concerned, the Nokia 105 packs a No essential camera on the back

The Nokia 105 runs Symbian and is controlled by a 800mAh removable battery. It quantifies 107.00 x 44.80 x 14.30 (stature x width x thickness) and weighs 70.00 grams.

The Nokia 105 is a solitary SIM (GSM) cell phone that acknowledges a Regular-SIM. Network alternatives incorporate FM.


Steps to repair Nokia 105 menu button

  • Take your lead,

  • Use your connecting wires,

  • Use a hot  soldering iron,

  • The runs the connecting wires as,

  • and just make jumper according to picture.


Nokia 105 keypad menu solution


done

say thanks

Disclaimer


Zamdtek is not associated with wireless organizations like Nokia, Samsung, Sony Ericsson, Lg, Motorola and some other and so forth Makers/Merchants .All trademarks are the property of the particular trademark owners. Zamdtek simply give outlines to ponder and repairing reason.

Hardware problems:  the solution Zamdtek posted here has been tested in our workshop. We don’t take any responsibility whatever if anything go wrong in cause of your own work . We repeat this and loud please do it at your own risk. You can ask us how. Use this guide at your own risk. Zamdtek shall not have any liability or responsibility for whatever happens to you and your device by using the instructions in this guide.

The instructions provided in this tutorial for educational purpose only. There is no guarantee that these steps will work for your device.

Post a Comment

10 Comments

Himangsu Kumar Das said…
Nokia 105 menu key not working, What can I do for this ??

please help me to do it
benzems said…
I will get back to you
samtech said…
I didn't get any jumper,is not drawn clearly. put it more brightly, thanks in advance.
benzems said…
ok
benzems said…
Has been updated
Unknown said…
Up down and call ok buttons are not working please any salutation
zamdtek said…
Please heat the phone "light" with rework station.
zamdtek said…
Then follow the carbon drw on the keypad surface
Unknown said…
how to make jup
mer
zamdtek said…
When you scratch the point a little, then you can connect collecting wires

Comments