MTK Android hard reset without volume keys eg Tecno M3

How to hard reset android that has bad volume buttons

Take a lookat the below picture and run the wire according to the diagram.

MTK Android hard reset without volume keys eg Tecno M3

Steps to hard reset MTK without Volume buttons

• hold the middle + up wire = up volume


• press Power button


• the phone will enter recovery mode


• press and hold Vol+


• enter wipe user


• select yes and wipe


• the follow the instructions

If your phone Brick after that

A hard brick is the worst thing that can happen to an Android device. This is when your phone does not boot up at all and does not charge. Fixing a hard bricked device is still not that complicated as far as you have all the tools required.

To fix a hard bricked device, you’ll need the following files –

PDA software for your laptop.
SPFlash Tool.
Your Stock Rom for the device you’re Fixing.
Download all the above requirements and continue with the guide.

NOTE: to download using a mobile device, you must have the MEGA app installed.

Install the PDA software on your laptop and follow all the prompts to successfully install the drivers on your laptop.

Extract the stock rom of the device you are flashing and locate the Scatter file. (it is normally in the txt format)

Disclaimer

We are not associate with wireless organizations like Nokia,Samsung,Sony Ericsson,Motorolo,  LG and some other and so forth Makers/Merchants .All trademarks are the property of the particular trademark owners.we simply give outlines to ponder and repairing reason.

Factory Hard reset will set your telephone in origional factorry settings. It will expel every one of the information and applications that you introduced. Your contacts will be evacuated and you need to include them once more.

Stock Firmware we attempt to give the best and most recent glimmer records and firmwares, Yet we don't ensure the exactness or similarity of any of the documents. So utilize them at your own hazard!.



Hardware problems:  the solution we posted here has been tested in our workshop. We don’t take any responsibility whatever if anything go wrong in cause of your own work . We repeat this and loud please do it at your own risk. You can ask us how.